Page 5 of 5
Re: Gamma not working
Posted: Mon Mar 14, 2016 7:22 pm
by Bumpkin
Hey burnit0017 thanks for finding the more extensive write-up I asked about. It turns out I've seen it before, but thanks again.
Bumpkin
Re: Gamma not working
Posted: Mon Mar 28, 2016 5:20 pm
by burnit0017
[youtube]
https://youtu.be/yfTBIvq_BNk[/youtube]
quick update, starting fabrication of rocket stove for heat source
Re: Gamma not working
Posted: Thu Mar 31, 2016 8:51 am
by burnit0017
[youtube]
https://youtu.be/wnbt8UDVVnU[/youtube]
I have to fix a air leak and add a tire valve so I can increase the internal pressure a small amount.
Showing signs of life....
Hot side about 600 F, cold side about 80 F.
Re: Gamma not working
Posted: Fri Apr 01, 2016 1:59 pm
by burnit0017
One other problem found, crank arm set screw was loose and allowed the phase to shift. Proceeding with repairs.
Re: Gamma not working
Posted: Sun May 08, 2016 9:17 am
by burnit0017
[youtube]
https://youtu.be/u5G7rNyFsbk[/youtube]
Another failed attempt. Next I will try to reduce the size of the power bellows. Hoping to reduce the amount of compression. Suggestions welcome.
Re: Gamma not working
Posted: Mon May 09, 2016 10:40 am
by burnit0017
Re: Gamma not working
Posted: Sat May 21, 2016 4:08 am
by burnit0017
http://www3.nd.edu/~me463d18/Files/Dere ... rmance.pdf
I just found this,just for info, big, basic, and affordable.